前保桿拆裝

EddieTsai

Title: EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL; 2013 MY Prius C [12/2012 -        ] REMOVAL1. REMOVE FRONT BUMPER ASSEMBLY (a) Apply protective tape, as shown in the illustration. Text in Illustration *1 Protective Tape (b) Remove the 5 screws. Text in Illustration *1 Screw *2 Bolt (c) Remove the 3 bolts. (d) Remove the 2 grommets as shown in the illustration. Text in Illustration *1 Engine Under Cover *2 Front Bumper Cover *3 Front Fender Liner (e) Disengage the 4 claws as shown in the illustration. HINT: Use the same procedure for the RH side and LH side. (f) Pull back the side of the front bumper assembly and disconnect each connector. NOTICE: Do not apply excessive force when separating the front bumper. (g) Remove the 3 clips. (h) Disengage the 2 claws and remove the front bumper assembly as shown in the illustration.

club

謝謝分享{:070:}

apple

喔嗚~
{:070:}

waynesun

好複雜唷~

PChao

Thanks for share ~ {:070:}

waynesun

https://www.youtube.com/watch?v=hCrM3rNm7zw
看他拆很簡單~~~

opq119

{:070:}{:070:}

EddieTsai

waynesun 發表於 2013-11-9 11:53
https://www.youtube.com/watch?v=hCrM3rNm7zw
看他拆很簡單~~~

好厲害! 這也搜到了...
有影片看就簡單多了!!!

atek945

好像在拆玩具一樣…

bmw5828

好文~~推!!!
感謝大大分享
{:070:}