Air Conditioner |
Tester Display
| Measurement Item/Range
| Normal Condition
| Diagnostic Note
|
Room Temperature Sensor
| Room temperature sensor (cooler thermistor) /
Min.: -6.50°C (20.30°F)
Max.: 57.25°C (135.05°F)
| Actual cabin temperature displayed
| -
|
Ambient Temp Sensor
| Ambient temperature sensor (thermistor assembly) /
Min.: -23.30°C (-9.94°F)
Max.: 65.95°C (150.71°F)
| Actual ambient temperature displayed
| -
|
Adjusted Ambient Temp
| Adjusted ambient temperature /
Min.: -30.80°C (-23.44°F)
Max.: 50.80°C (123.44°F)
| -
| -
|
Evaporator Fin Thermistor
| Evaporator temperature sensor (No. 1 cooler thermistor) /
Min.: -29.70°C (-21.46°F)
Max.: 59.55°C (139.19°F)
| Actual evaporator temperature displayed
| -
|
Evaporator Target Temp
| Evaporator target temperature /
Min.: -327.68°C (-557.82°F)
Max.: 327.67°C (621.81°F)
| Evaporator target temperature displayed
| -
|
Solar Sensor (D Side)
| Solar sensor /
Min.: 0
Max.: 255
| Solar sensor value increases as brightness increases
| -
|
Engine Coolant Temp
| Engine coolant temperature sensor /
Min.: 1.30°C (34.34°F)
Max.: 90.55°C (194.99°F)
| Actual engine coolant temperature displayed
| -
|
Set Temperature (D Side)
| Set temperature /
Min.: MAX COLD
Max.: MAX HOT
| Set temperature displayed
| -
|
Blower Motor Speed Level
| Blower motor speed level /
Min.: 0
Max.: 31
| Displayed speed level increases in range between 0 and 31 as blower motor speed increases
| -
|
Regulator Pressure Sensor
| Air conditioning pressure sensor /
Min.: -456.68 kPa (-66.2 psi(gauge))
Max.: 3294.37 kPa (478 psi(gauge))
| Actual pressure displayed
| -
|
Air Mix Servo Targ Pulse(D)
| No. 1 air conditioning radiator damper servo sub-assembly (air mix) target pulse /
Min.: 128
Max.: 383
| MAX. COLD: 257 (pulse)
MAX. HOT: 173 (pulse)
| -
|
Air Mix Servo Actual Pulse(D)
| No. 1 air conditioning radiator damper servo sub-assembly (air mix) actual pulse /
Min.: 128
Max.: 383
| MAX. COLD: 257 (pulse)
MAX. HOT: 173 (pulse)
| -
|
Air Outlet Servo Pulse (D)
| No. 2 air conditioning radiator damper servo sub-assembly (air outlet) target pulse /
Min.: 128
Max.: 383
| FACE: 267 (pulse)
B/L: 250 (pulse)
FOOT: 227 (pulse)
FOOT/DEF: 220 (pulse)
DEF: 206 (pulse)
| -
|
Air Outlet Servo Actu Pulse(D)
| No. 2 air conditioning radiator damper servo sub-assembly (air outlet) actual pulse /
Min.: 128
Max.: 383
| FACE: 267 (pulse)
B/L: 250 (pulse)
FOOT: 227 (pulse)
FOOT/DEF: 220 (pulse)
DEF: 206 (pulse)
| -
|
Air Inlet Damper Targ Pulse
| No. 1 blower damper servo sub-assembly (air inlet) target pulse /
Min.: 128
Max.: 383
| RECIRCULATION: 287 (pulse)
FRESH: 254 (pulse)
| -
|
Air Inlet Damper Actual Pulse
| No. 1 blower damper servo sub-assembly (air inlet) actual pulse /
Min.: 128
Max.: 383
| RECIRCULATION: 287 (pulse)
FRESH: 254 (pulse)
| -
|
Electric Heater Count*1
| Maximum heater operation level /
Min.: 0
Max.: 3
| Maximum possible operation level of quick heater assembly displayed
| -
|
Electric Heater Active Level*1
| Actual heater operation level /
Min.: 0
Max.: 3
| Actual operation level of quick heater assembly displayed
| -
|
Compressor Speed
| Compressor speed /
Min.: 0 rpm
Max.: 65535 rpm
| Actual compressor rotation speed displayed
| -
|
Compressor Target Speed
| Compressor target speed /
Min.: 0 rpm
Max.: 65535 rpm
| Compressor target rotation speed displayed
| -
|
Shift Set Temperature
| Shift set temperature /
2C decr, 1C decr, Normal, 1C incr, 2C incr
| Customized value displayed
| -
|
Compressor Mode
| Compressor mode /
Auto or Manual
| Customized value displayed
| -
|
Noise and Vibration Reduction
| Noise and vibration reduction /
OFF or ON
| Customized value displayed
| -
|
ECO MODE Cancel
| ECO MODE Cancel /
OFF or ON
| Customized value displayed
| -
|
ECO Switch
| ECO mode switch (eco switch assembly) /
OFF or ON
| ECO mode switch (eco switch assembly) operated: ON
(when switch is pressed)
| -
|
ECO mode switch (eco switch assembly) not operated: OFF
(when switch is not pressed)
| -
|
Refrigerant Shortage Check
| Refrigerant shortage check /
ON or OFF
| Customized value displayed
| -
|
Fan speed increment control
| Fan speed increment control /
Slow, Normal, Fast
| Customized value displayed
| -
|
Foot/DEF Auto Mode
| Foot/DEF Auto Mode /
ON or OFF
| Customized value displayed
| -
|
Foot/DEF Auto Blow Up
| Foot/DEF Auto blower speed increase /
ON or OFF
| Customized value displayed
| -
|
Ambient Temperature Shift
| Ambient temperature shift /
3C decr, 2C decr, 1C decr, Normal, 1C incr, 2C incr, 3C incr
| Customized value displayed
| -
|
Pls Servo Test Sts
| Pulse servo motor test status/
Wait, Move, Comp, Error, Stop
| Pulse servo motor test status
| -
|
Compressor Drive Check
| Compressor drive check /
OK or NG
| NG: Compressor does not drive
OK: Compressor drives
| -
|
Number of Trouble Codes
| Number of trouble codes /
Min.: 0
Max.: 255
| Number of DTCs displayed
| -
|
发表于 2013-11-25 12:22
发表于 2013-12-14 11:11