EddieTsai 发表于 2013-11-9 00:35

前保桿拆裝



Title: EXTERIOR PANELS / TRIM: FRONT BUMPER: REMOVAL; 2013 MY Prius C
REMOVAL1. REMOVE FRONT BUMPER ASSEMBLY

(a) Apply protective tape, as shown in the illustration.
Text in Illustration
*1
Protective Tape

https://techinfo.toyota.com/t3Portal/document/rm/RM2490U/images/B307332E01.png

(b) Remove the 5 screws.
Text in Illustration
*1
Screw

*2
Bolt

https://techinfo.toyota.com/t3Portal/document/rm/RM2490U/images/B307333E01.png
(c) Remove the 3 bolts.

(d) Remove the 2 grommets as shown in the illustration.
Text in Illustration
*1
Engine Under Cover

*2
Front Bumper Cover

*3
Front Fender Liner

https://techinfo.toyota.com/t3Portal/document/rm/RM2490U/images/B307346E01.png

(e) Disengage the 4 claws as shown in the illustration.
HINT:
Use the same procedure for the RH side and LH side.
https://techinfo.toyota.com/t3Portal/document/rm/RM2490U/images/B307334.png
(f) Pull back the side of the front bumper assembly and disconnect each connector.
NOTICE:
Do not apply excessive force when separating the front bumper.

(g) Remove the 3 clips.
https://techinfo.toyota.com/t3Portal/document/rm/RM2490U/images/B307335.png

(h) Disengage the 2 claws and remove the front bumper assembly as shown in the illustration.
https://techinfo.toyota.com/t3Portal/document/rm/RM2490U/images/B307336.png


club 发表于 2013-11-9 00:47

謝謝分享{:070:}

apple 发表于 2013-11-9 01:57

喔嗚~
{:070:}

waynesun 发表于 2013-11-9 03:32

好複雜唷~

PChao 发表于 2013-11-9 07:12

Thanks for share ~ {:070:}

waynesun 发表于 2013-11-9 11:53

https://www.youtube.com/watch?v=hCrM3rNm7zw
看他拆很簡單~~~

opq119 发表于 2013-11-9 13:45

{:070:}{:070:}

EddieTsai 发表于 2013-11-9 14:29

waynesun 發表於 2013-11-9 11:53 static/image/common/back.gif
https://www.youtube.com/watch?v=hCrM3rNm7zw
看他拆很簡單~~~

好厲害! 這也搜到了...
有影片看就簡單多了!!!

atek945 发表于 2013-11-10 09:51

好像在拆玩具一樣…

bmw5828 发表于 2013-11-10 15:12

好文~~推!!!
感謝大大分享
{:070:}
页: [1] 2
查看完整版本: 前保桿拆裝